Certificazione CE Olio Bottiglia Jack Fornitori Citazioni
Oil Bottle Jack, this type of jack is widely used not only in construction, but also in maintenance tasks and heavy lifting scenarios, providing great power for a variety of purposes.
Descrizione del prodotto:
The Oil Bottle Jack is a mechanical tool that drives the piston rod up and down through a hydraulic cylinder and can be used to lift heavy objects or support objects. This jack is mostly used to replace automobile tires, it is composed of column, cylinder, hydraulic pump, etc., simple operation, high efficiency, good stability.
Profilo aziendale:
Hebei Junda Lifting Machinery Co., Ltd. ha più di 10 anni di ricerca e sviluppo e di esperienza di produzione, i nostri prodotti paranco a catena, paranco elettrico a fune, paranco elettrico a catena, micro paranco elettrico, carrello elevatore, catena G80, sartiame, esportati in tutto il mondo. I nostri prodotti hanno superato la certificazione CE GS, di qualità affidabile. Abbiamo creato una rete di vendita perfetta e un sistema di assistenza post-vendita. Con la nostra ricca esperienza, possiamo fornirvi un supporto di soluzione professionale e un servizio soddisfacente. Offriamo anche servizi OEM. Accogliamo calorosamente gli amici a visitare.
Introduzione al prodotto:
Oil Bottle Jack, this type of jack is widely used not only in construction, but also in maintenance tasks and heavy lifting scenarios, providing great power for a variety of purposes.
It is commonly used for vehicle maintenance, such as tire replacement. For this purpose, every car usually has a jack in the trunk. These jacks are primarily of the hydraulic type and lift the vehicle with a lever hydraulic oil pump.
Caratteristiche:
1. Lifting heavy objects: Vertical hydraulic jacks can be used to lift heavy objects by adjusting the height of the jack, and the common case is to use it in automobile maintenance to lift the car for maintenance.
2. Support heavy objects: Some heavy objects need to be firmly supported at a certain height to prevent them from collapsing or moving. At this time, vertical hydraulic jacks can be used to support heavy objects.
3. Stable heavy objects: In actual operation, vertical hydraulic jacks can stabilize objects by pressing heavy objects to prevent problems such as danger or deformation during use.
Specificazioni di prodotto: il prodotto
Dettagli sui prodotti: il prodotto
1.Non-slip head, increase the friction between the jack and the vehicle contact, reduce the risk of vehicle slip.
2.Screw rod, flexible height adjustment, rotary lifting, strengthening durable load capacity.
3.1. Install the jack: First of all, place the jack under the weight that needs to be lifted or supported, and then use a wrench to tighten the bolt so that it is firmly fixed with the weight.
2. Use a jack: First place the hydraulic pump above the jack, and then use the pressure rod to manually press, if higher pressure is needed, you can use an air compressor or an electric pump to provide power. Note that the pressure of the jack should be strictly controlled during use to avoid damage to the object being lifted.
3. Assembly completion: When the jack needs to be used, remove it first, and then thoroughly clean and check to ensure that it can operate normally in the next use.
4.Made of steel piston rod, flexible lifting corrosion resistance.
